Product
ProductCurrent position > Product detail

Salt water flowmeter

『Salt water flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Working principle of ultrasonic flowmeter, can desalinated water be measured with an ultrasonic flowmeter?

The principle does not rely on water to disturb the salt in the old age. What you are worried about should be the electromagnetic flowmeter.

. Electromagnetic flowmeter is an induction instrument that measures the volume flow rate of conductive medium inside a tube based on Faradays law of electromagnetic induction, so it is related to salt content. Ultrasonic flowmeter is an instrument that measures flow by detecting the effect of fluid flow on ultrasonic beams (or ultrasonic slow pulse). Principle: According to the principle of signal detection, ultrasonic flow meters can be divided into propagation velocity difference method (direct time difference method, time difference method, phase difference method, and frequency difference method), beam offset method, Doppler method, cross-correlation method, spatial filtering method, and noise method. Advantages: (1) Can be used for non-contact measurement; (2) Measurement without flow obstruction and pressure loss; (3) It can measure non-conductive liquids and is a supplement to electromagnetic flow meters for unobstructed measurement. Including code

2. Product parameters of Yikou water softener 818ECM

The product parameters of Yikou water softener 818ECM are as follows: Suitable for households with 34 people: designed specifically for households with 34 people. Working principle: Adopting the principle of resin ion exchange. Control mode: Fully automatic control, with functions such as salt level prediction and salt shortage alarm. Outlet water quality: meets the standards of the "Specification for Sanitary Safety Socks and Functional E

Salt water flowmeter
valuation of Domestic Drinking Water Quality Treatment Devices". Dimensions: 115 * 51 * 36cm. Pipeline connection: Supports 1-inch inlet and outlet, using customized fittings for connection. Work pressure: 0.140.35MPa. Water temperature requirement: 548 ℃. Power requirement: 220V two hole socket. Resin tank material: Food grade lined glass material. Workflow data: Water injection time: 26 minutes, flow rate of 1.14 liters/minute. Salt water cleaning stage flow rate: 0.24 liters/minute. Backwash stage time: 3 minutes. Maximum flow rate: 9.06 liters per minute. Control system: Intelligent computer control, automatically adjusts based on flow meter data and hardness values, achieving dual control of time and flow rate. Equipped with a 12ml/s AquaTurbine flow meter. System features: It has memory function, 24-hour power-off ball protection, and automatic electronic detection function, which can monitor the circuit status and display the current time and softening status information. Resin part: Resin capacity: 17.5L. Resin tank outer layer: ABS sanitary material inner layer wrapped with fiberglass. Total water flow: up to 10000T. Warranty service: Enjoy a one-year warranty service. Attention: When using lead in the advertising cavity, it is necessary to regularly replace the resin and pay attention to waterproofing and sun protection.

3. How to choose the material of electromagnetic flowmeter?

Tianjin Xuner Instrument answers for you: As a commonly used flow measurement instrument, the selection of material for electromagnetic flowmeter is also an important factor. Due to the fact that only the electrode and the interior of the measuring tube are in contact with the medium in the electromagnetic flowmeter, it

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610