Current position > Product detail
『Soap flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1.gl-102b? The electronic soap film flowmeter displays lo unit when turned on! clean! What is the reason? How to handle it ..
The soap film flowmeter displays LO UNIT when turned on! CLEAN! The situation may be due to the lower limit sensor of the soap film tube being submerged in water. This situation usually leads to sensor failure or malfunction, resulting in an alarm. To solve this problem, it is possible to try drying the scattered ridges in the sensor section. The specific method is to disassemble the flowmeter and carefully inspect the lower limit sensor to confirm if there are any water stains remaining. Use a clean and tidy soft cloth or specialized desiccant for drying, avoid using sharp tools to prevent damage to the sensor. During the drying process, it is important to ensure that the sensor is completely dry and avoid contact with moisture again. After drying treatment, reassemble the flowmeter and perform a startup test. If the problem is still not resolved, it is recommended to contact professional technicians for inspection and maintenance to ensure that the flowmeter returns to normal operation. In daily use, it is necessary to pay attention to keeping the flowmeter clean and dry, and avoid the sensor part from coming into contact with moisture. Regular cleaning and inspection can effectively extend the service life of flow meters. In addition, the flowmeter should be avoided from being exposed to humid environments for a long time during use, such as laboratories or high humidity environments, to prevent the sensor from being damaged by moisture. If it must be used in a humid environment, it is recommended to regularly dry it to ensure that the flowmeter works properly. In short, the soap f
_600x400.jpg)
2. How to use soap film flowmeter
1. Pour soap water into the latex dropper at the bottom. 2. Connect the detector outlet with a fine rubber tube and the soap foam flowmeter bottom inlet. 3. Squeeze the latex dropper to produce a soap film and measure the time required for the soap film to flow through a certain volume. 4. Divide the volume by time. If it is an electronic soap film flow meter, it is convenient and can be automatically measured and calculated.
3. Usage of soap film flowmeter
The soap film flowmeter is an instrument that calculates gas or liquid flow rate. Its internal microprocessor is combined with sensitive components to measure it.
Calculate the starting and ending time of the soap film or liquid surface passing through a certain volume inside the glass tube, in order to calculate the flow rate and display it on the screen. The following is the specific usage method of the soap film flowmeter: Preparation stage: Pour soap water: Pour soap water into the latex dropper at the bottom of the soap film flowmeter. Ensure that the soap water concentration is appropriate to form a stable and continuous soap film. Connection and Settings: 2 Connecting rubber tube: Connect the thin rubber tube to the outlet of the detector and the inlet at the bottom of the soap film flowmeter. Ensure tight connection and no air leakage3. Choose measurement mode: If using an electronic soap film flowmeter, there is no need to manually calculate the flow rate, the instrument w