air flow measurement

『air flow measurement|rotameter flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Representative paper by Ye Shuliang

Ye S, Song J, Zhang B, et al. Development of high-precision high-frequency phase-shifting circuit[C]//Sixth International Symposium on Precision Engineering Measurements and Instrumentation. International Society for Optics and Photonics, 2010: 75441C-75441C-7.Ye S, Gao P. A novel technique of phase-locked interference positioning and phase discrimination[C]//5th International Symposium on Advanced Optical Manufacturing and Testing Technologies. International Society for Optics and Photonics, 2010: 765702-765702-6.（EI Collected: Wang Xiaona, Shen Haizhen, Zhang Wei, Ye Shuliang Research on Local Autocorrelated Image Splicing Algorithm Combined with Triangular Geometric Constraints [J]. Optoelectronic Engineering, 2015, 04:32-37 WANG Xiaona,WANG Xiaoning,HOU Dexin,YE Shuliang. Surface crack imaging based on delayed temperature difference at symmetric points by laser spot thermography[J]. Instrumentation, 2014,02:30-37. Hou Dexin, Sun Xiaoying, Ye Shuliang Uneven excitation and separation methods in induction thermography [J]. Journal of Instrumentation, 2014, 07:1466-1475 Yang Suijun, Zhang Wei, Fu Lin, Ye Shuliang Multi sensor joint combustion and explosion identification technology based on rough sets [J]. Journal of Instrumentation, 2014, 06: 1254-1260 Xu Hao, Hou Dexin, Qiu Jian, Ye Shuliang Autocorrelated Processing and Multi feature Identification Method for Ferrite Crack Detection [J]. Journal of Instrumentation, 2014, 35 (1): 117-124. Liu S, Xue Z, Ye S, et al. Characteristic Evaluation and Experimental Analysis of the Ultra high Precision Three-Dimensional Scanning Probe [C]//International Symposium on Precision Engineering Measurement and Instrumentation 2012.

International Society for Optics and Photonics, 2013: 87592M-87592M-8. (EI included) Xu H, Hou D, Qiu J, Ye S. Extracting crack signal of magnetic ring based on MAX262[C]//International Symposium on Precision Engineering Measurement and Instrumentation 2012. International Society for Optics and Photonics, 2013: 875905-875905-7.（EI Included) Hou D, Qiu J, Ye S. Wireless communication in the airflow verification system of biological safety cabinet[C]//International Symposium on Precision Engineering Measurement and Instrumentation 2012. International Society for Optics and Photonics, 2013: 87591R-87591R-6.

2. What method is commonly used for thermogravimetric analysis? Thermogravimetric analysis generally involves placing the sample in an aluminum crucible and weighing it on a balance before and after placing it to obtain the weight of the sample. The purpose of obtaining the weight is to make the sample weight suitable for the highest possible thermogravimetric accuracy. After the sample is placed, the crucible cover and crucible should be pressed together on a dedicated tablet press to prevent the sample from being ejected from the crucible by the thermal decomposition airflow or thermal decomposition jet during the heating process, which may cause non thermal decomposition weight loss in the experiment. The sample crucible is placed in the sample furnace of the thermogravimetric analyzer, and at the same time, a reference sample or an empty crucible without a reference material is placed in the reference furnace. The reference material, such as alumina powder, should also be placed in an aluminum crucible and sealed with a lid. The reference material is a thermally stable substance that has no thermal effect in

『SILVER Official Website SERVICE』