Current position > News detail
『Unicom traffic calculation』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
How much does it cost for China Unicoms data to exceed one gram? The charging standard for China Unicoms data to exceed one gram mainly depends on the type of package used by the user. Generally speaking, for users with high data usage within the package, such as packages with 1GB or more (inclusive), a fee of 10 yuan per GB will be charged for exceeding the data usage. That is to say, if the users package includes 1GB or more of data and exceeds this limit, an additional fee of 10 yuan will be charged for every 1GB of extra data. However, if the users data usage in the package is relatively low, such as 1GB or less, the fee for exceeding the data usage may be charged per MB, specifically 0.27 yuan/MB. Therefore, the fee for exceeding one GB (i.e. 1024MB) will be much higher than 10 yuan. In addition, China Unicom may also adopt a tiered billing system, where the cost per MB may gradually decrease as users exceed their data usage. But the specific charging standards in this situation will be more complicated and may vary depending on the region and time. It is recommended that users pay attention to monitoring their usage when using data to avoid unnecessary expenses. Search for destruction2. I connected my phone data, and he sent me a message with a rate of 0.0003 per KB, but I used 44MB of this. What should I do
1MB=1024KB. If the 3G package exceeds the data in the package, it will be charged at 0.0003 yuan/KB. You have exceeded 44MB, and the calculation is as follows: 44MB * 1024=45056KB. Rolling Travel Caution: 45056KB * 0.0003=13.5168 yuan. That is to say, if you exceed the data in the package and use 44MB, you need to pay the additional data fee of the Zhenzheng package, which is 13.5168 yuan, r
3. Unicom IoT dedicated data card
4. What is the unit of data calculation for Unicom cards in MB, NB, GB, and who is bigger and who is smaller?
In descending order: Traffic unit: 1GB=1024MB, 1MB=1024KB, 1KB=1024B.
5. How does China Unicom calculate excess data usage?
There are generally two ways for China Unicom to charge for excess data usage beyond the package: tiered billing: for excess data usage beyond the package, the first 100MB will be charged at 0.27/MB.
. The range exceeding 100MB to 500MB will be charged at 0.15 yuan/MB. After exceeding 500MB, a fee of 0.03 yuan/MB will be charged. Charging based on fee threshold conversion: Any excess will be charged at 0.27/MB from the beginning. When the accumulated cost of Yanhui reaches 10 yuan, it will automatically convert to a billing unit of 10 yuan/100MB, meaning that there will be no additional charges for the subsequent 100MB. When the cumulative cost reaches 60 yuan, it will be automatically upgraded to a billing unit of 60 yuan/GB, and the excess will be calculated according to this standard in a cyclic manner. Other precautions: Fee cap: After the cumulative external data fee of the package reaches 600 yuan in the current month, domestic data will no longer be charged. Data usage restriction: The data network will automatically shut down when usage reaches 15GB and resume the following month. If the total data usage (including data within the package) reaches 40GB, the data network will be directly shut down for the current month and will only be restored the following month. Special package rules: Different packages may have different rules, such as Tencent King Card, ice cream pac