Current position > News detail
『Great Plains Industries Flow Meter: Industrial Fuel Trackers』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Great Plains Industries Flow Meter: Industrial Fuel Trackers
Quick Answer: Great Plains Industries (GPI) flow meters are reliable mechanical totalizing instruments built for diesel, gasoline, kerosene, and light oils. They suit fuel transfer skids, fleet refueling, and generator consumption logging. Silver Automation Instruments supplies GPI meters with direct pricing, stock availability across Southeast Asia and the Middle East, and fast technical support.
Why GPI Fuel Meters Fit Industrial Transfer
Engineers choose GPI flow meters when the job demands a simple, rugged pulse output device that does not drift over time. These oval gear and turbine based meters measure fuel with repeatability of plus or minus 0.5 percent to 1 percent of reading, depending on the model. The construction uses anodized aluminum or stainless steel housings, Viton or PTFE seals, and precision machined rotors. That combination handles viscosities from diesel (2 to 6 cSt) up to 50 cSt without a linearity penalty.
We have seen GPI flow meters installed on mobile refueling trailers in Queensland, on fuel management panels at a gold mine in Peru, and inside generator enclosures across remote sites in Saudi Arabia. The thread types are mostly NPT in 1 inch or 1-1/2 inch, which match common fuel nozzles and hoses. The pulse output resolution is typically 100 to 400 pulses per liter, enough for most digital totalizers or PLC counters.
Common Models and Their Use Cases
The GPI 01A Series works best for low flows from 5 to 100 liters per minute in diesel transfer applications. It uses an oval gear measuring element and a mechanical register with resettable totalizer. Many fleet workshop supervisors prefer this model because it needs no external power and tolerates typical job site dust and vibration.
For higher flow, the GPI 03 Series handles up to 380 liters per minute and is often specified on fuel trucks and bulk tanks. This model can be ordered with a digital display and 4-20 mA output, which allows direct integration with a SCADA system. A liquid fertilizer distributor in Thailand recently chose the GPI 03 with stainless steel internals for diesel blending and batch control.
The GPI FLOMEC series adds compact turbine sensors, often on plastic molded bodies. These are common in chemical injection and light fuel dispensing where cost per point matters more than maximum durability. One customer in Vietnam asked us to pair FLOMEC sensors with our flow totalizers for 24 diesel dispenser upgrades at a fishing port. We supplied the flange adaptors, PTFE gaskets, and wiring diagrams within the same shipment.
Installation and Field Experience
Most GPI fuel meters operate in a full pipe, flooded condition. Pulsation from a diaphragm pump will affect accuracy, so a simple air chamber or pulsation dampener upstream solves that. The inlet section typically requires a Y strainer with 60 mesh to protect rotors from rust flakes or sand. Here is the thing, many installers skip the strainer and then see mechanical wear after three months. The strainer is cheap insurance.
We always recommend a flexible hose connection before and after the meter body. That reduces pipe stress and vibration that can ovalize the measuring chamber. For diesel with biodiesel content above B20, we suggest Viton seals instead of standard Buna N, because biodiesel swells standard elastomers. Send us your fuel type, biodiesel percentage, and viscosity, and we will confirm the correct seal material before quoting.
Typical Industrial Applications
Fleet refueling yards. A Malaysian logistics firm used 20 GPI 01A meters on their diesel dispensers to track consumption per truck. Each meter connects to a remote display inside the supervisor’s office via a simple pulse cable. Monthly fuel
Generator test benches. A power rental company in the UAE installed GPI 03 meters on their 500 kVA genset test cells. The meters totalize primary fuel consumption during load bank tests. The readings match the ECU fuel rate within 1.5 percent, which is enough for warranty validation.
Mining fuel service trucks. In Chile, a contractor integrated GPI oval gear meters into their mobile fueling units for underground loaders. The meters operate at 1,800 meters above sea level with no recalibration needed.
Marine bunkering support. A small barge operator in Indonesia uses GPI meters with a manual batch preset valve to deliver MGO to fishing vessels. The setup is low cost and only needs an annual calibration check using a proving can.
How to Order from Silver Automation Instruments
We keep common GPI models and spare parts in our Nanjing warehouse. If a meter needs a new seal kit or register, we can ship same day by DHL to Southeast Asia, Australia, or the Middle East. When you request a quotation, please send us these details:
Liquid type (diesel, gasoline, kerosene, biodiesel mix)
Flow range in liters per minute or gallons per minute
Pipe size and thread type (1 inch NPT, 1-1/2 inch BSP, etc.)
Output requirement: mechanical register, pulse, 4-20 mA, or digital display
Operating pressure in bar and temperature in °C
That information lets us propose the exact GPI model, confirm material compatibility, and include all required fittings and strainers in one package.
FAQ
What fuels can a GPI flow meter handle?
GPI oval gear and turbine meters are designed for diesel, gasoline, kerosene, jet fuel, mineral spirits, and light oils. For biodiesel blends above B20, we recommend confirming seal material first. Do not use these meters on water or corrosive chemicals without verifying wetted materials with our team.
What is the typical accuracy of a GPI fuel flow meter?
Most models deliver plus or minus 0.5 percent of reading for diesel at constant flow. Repeatability is plus or minus 0.2 percent. This applies to oval gear mechanisms. Turbine models may show plus or minus 1.0 percent depending on flow profile and viscosity.
Do GPI meters need external power?
Mechanical register models require no power. Meters with digital display or pulse output need a loop powered 4-20 mA circuit (usually 8 to 28 VDC). The pulse output models output a passive reed switch or NPN signal; the receiving device must supply its own pull up voltage.
Can GPI flow meters be field calibrated?
Yes. You can calibrate the mechanical register or the K-factor on digital models using a known volume. We recommend a master meter or volumetric prover. For critical custody transfer applications, we suggest a factory recalibration every 12 months.
What pipe sizes and connections are available?
Standard sizes are 1 inch and 1-1/2 inch NPT or BSP threads. Flanged connections are possible with adaptors. The maximum working pressure is typically 50 bar for aluminum body meters and 100 bar for stainless steel. Confirm your exact pressure rating when ordering.
Get a GPI fuel meter quotation now. Email [email protected] with your fuel type, flow range, pipe size, and output needed. Or call +86-25-68650347. For instant messages, reach us on WhatsApp at +86-25-52155837 or WeChat at +86 15365082610. Silver Automation Instruments delivers GPI industrial fuel trackers to Southeast Asia, Oceania, Middle East, Africa, and Latin America, backed by local language support and fast stock dispatch.