Current position > Product detail
『Endress Hauser Magnetic Flow Meter Manual Collection: Promag H, P, and W User Guides』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Endress Hauser Magnetic Flow Meter Manual Collection Promag H P and W User Guides
Quick Answer: The Promag H, P, and W user guides cover DN 2 to DN 2400 electromagnetic flow meters for chemical, food, water, and wastewater lines. Silver Instruments supplies compatible mag meters from DN 15 to DN 2000 with 4-20 mA HART, pulse, and RS485 outputs. Send your pipe size in DN, flow range, process fluid, pressure in bar, and temperature in °C to get a cross reference quote.
What These Manuals Cover
Engineers in Vietnam, Malaysia, and Chile often search for the Endress Hauser magnetic flow meter manual collection when they install, calibrate, or repair a Promag H, P, or W meter. The manuals include wiring diagrams, grounding rules, liner and electrode selection, error code lists, and empty pipe detection settings. We have seen many customer sites use these guides for chemical dosing skids, utility water lines, and wastewater discharge pipes.
The Promag H is a compact meter for small line sizes and aggressive fluids. It appears in food and chemical processes where PTFE or PFA liners are required. Promag P is the general purpose meter for clean water, raw water, and utility systems. Promag W is the workhorse for water and wastewater plants with large pipe diameters.
Key Specifications In The Promag H, P, and W Manuals
The Promag H covers DN 2 to DN 150 with PTFE or PFA liners and electrode materials such as Hastelloy C, tantalum, and platinum. Promag P covers DN 15 to DN 600 with hard rubber or polyurethane liners. Promag W extends to DN 2000 for large water pipelines. Minimum fluid conductivity is typically 5 µS/cm for most standard meters. Some high temperature versions require 20 µS/cm.
Output options listed in the manuals include 4-20 mA HART, pulse, frequency, and Modbus RS485. Accuracy for Promag P and W is often 0.2 percent of reading. Process temperature range depends on liner material and can go from -20 °C to 150 °C.
Silver Instruments Cross Reference For Promag H, P, and W
In practice, plant engineers keep the Promag manuals for reference and then compare replacement options. Silver Automation Instruments manufactures electromagnetic flow meters with similar liner and electrode combinations. For a chemical line that uses a Promag H, ask for the Silver Instruments EMAG-H series with PTFE liner and Hastelloy C electrodes. For water and wastewater lines that use Promag P or W, ask for the EMAG-W series with hard rubber liner and 316L electrodes.
Silver Instruments electromagnetic flow meters cover DN 15 to DN 2000. Standard outputs are 4-20 mA HART, pulse, and RS485. Accuracy is 0.5 percent of reading for DN 15 to DN 40 and 0.2 percent for DN 50 and above. This meets the typical requirements for water, wastewater, chemical, and food plants. We quote these replacements f
Installation Notes From The Manuals
The Promag manuals state that the meter needs a straight inlet run of 5 pipe diameters and an outlet run of 2 pipe diameters. For plastic pipes or lined pipes, grounding rings are required. Do not install a mag meter in a partially filled pipe unless empty pipe detection is active. These installation rules apply to Silver Instruments electromagnetic flow meters as well.
Here is a field example. A chemical plant in Thailand had unstable readings on a Promag P installed on a PVC pipe. The manual required grounding rings but the installer skipped them. After fitting grounding rings, the reading was stable. This is a small detail that saves many hours of troubleshooting on site.
When To Choose Silver Instruments Mag Meters
Silver Automation Instruments is a flow meter manufacturer and supplier based in Nanjing, China. We ship electromagnetic flow meters to Southeast Asia, Oceania, Latin America, Africa, and the Middle East. Many customers ask us for a Promag H, P, or W replacement because they need shorter lead time or a different price point. We do not sell Endress Hauser manuals. We supply new electromagnetic flow meters with full English user guides.
If you need a cross reference for an existing Promag H, P, or W, send us your pipe size in DN, flow range, process fluid, pressure in bar, temperature in °C, and liner requirements. Our engineers will recommend a Silver Instruments model. Contact us by Tel: +86-25-68650347, Whatsapp: +86-25-52155837, or WeChat: +86 15365082610.
FAQ
Question: Can Silver Instruments provide a direct replacement for a Promag H meter?
Answer: Yes, for most chemical and hygienic applications. We match DN size, liner material, electrode material, and process connection. Send the Promag H tag number or manual specifications for a fast quote.
Question: What is the minimum conductivity for Silver Instruments mag meters?
Answer: Standard units need 20 µS/cm. Some models work down to 5 µS/cm. This range matches most Promag H, P, and W applications.
Question: Do you supply the Endress Hauser Promag P user guide PDF?
Answer: No, Silver Instruments does not host or distribute Endress Hauser user guides. We supply our own English manuals with every new electromagnetic flow meter.
Question: What output signals are available on Silver Instruments mag meters?
Answer: 4-20 mA HART, pulse, frequency, and RS485 are standard options. Modbus RTU can be added if needed.
Question: How long is delivery to Southeast Asia or Latin America?
Answer: Standard electromagnetic flow meters ship in 7 to 12 days. Large DN units above DN 600 may take 15 to 20 days. Send your required DN size for exact lead time.