What are the types of mass flow meters

『The purpose of flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Characteristics and applications of various flow meters

2. Applications and usage methods of glass rotor flow meters

Glass rotor flow meters are instruments used to accurately measure liquid or gas flow rates, widely used in chemical, pharmaceutical, environmental protection, and scientific research fields.

Firstly, it is mainly used in industrial production, responsible for accurately controlling the addition ratio of chemical reagents or drugs, and is a key component to ensure the efficiency of chemical reactions and the stability of drug quality.

. In laboratory research, it provides accurate flow data for various fluid experiments and is an important guarantee for the reliability of scientific research results. Containing Pai

2. Usage 1 During installation, it is necessary to ensure that the flowmeter is in a vertical position, with the fluid flow direction from bottom to top, and the vertical deviation should not exceed 2 degrees. To ensure measurement accuracy, a straight pipe section of at least 5 times the pipe diameter length should be reserved at the front end of the flowmeter, and at least 2 times the pipe diameter should be reserved at the rear end. At the same time, the installation position should avoid strong mechanical vibrations and strong magnetic field environments. Before use, it is necessary to carefully check whether the glass tube has cracks or signs of damage. Gently shake the flowmeter by hand to confirm that the internal float can move up and down freely without any jamming phenomenon. When adjusting the flow rate and reading operation, slowly open the inlet valve first to allow the fluid to enter smoothly and avoid instantaneous impact damage to the float.

The purpose of flowmeter
After the float is stabilized, read the scale value of the tomb cluster corresponding to its maximum diameter. It should be noted that the scale is usually the flow rate under standard conditions. For gas media, this reading is the old cherry volume of the standard flow scale; For liquids, the actual operating flow rate should be used. When closing after use, the valve should also be operated slowly to cut off the fluid first. If the equipment is idle for a long time, the residual fluid inside must be completely emptied, and the glass tube part must be protected to prevent accumulation or damage caused by collision.

3. Application status and development trend of flow meters

Application status and development trend of flow meters As the core equipment in the field of industrial measurement and metrology, flow meters have applications covering multiple industries such as energy, environmental protection, chemical industry, and transportation.

. With breakthroughs in microelectronics technology, new materials, and intelligent technology, Jingyu flow meters are evolving from traditional mechanical methods to high-precision, intelligent, and modular directions. The following analysis will focus on the current application status, technology classification, market landscape, and future trends.

1. Application Status Industry Demand Driven Growth Global industrial output improvement and energy structure transformation drive the continuous expansion of flowmeter demand.

. In 2020, the production of flow meters in China reached 71.9153 million units, with a market demand of 74.6659 million units and a market size exceeding 9.987 billion yuan. Among them, the petrochemical industry has the highest proport

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
+86 15365082610